Suche

 

SCHWINGMETALL® Classic Plus

Products

SCHWINGMETALL® Classic Plus

High-quality technical products with additional benefits, e.g. combi mounts. These enhance functionality and provide extra benefits for inclined mounts with transverse forces: For natural frequencies of up to 3.7 Hz, they offer excellent transverse stability of the suspended mass. To achieve this, they are bolted down on both the machine and foundation side. As a result, they also fulfill special requirements, e.g. identical spring values in a vertical and transverse direction.

SCHWINGMETALL® Cone mounts

SCHWINGMETALL® Cone mounts

are universally usable power unit mounts for medium loads. Thanks to their high radial stiffness in relation to axial stiffness, these components offer excellent transverse stability. In combination with appropriate disks, these mounts have end stops and are protected against tear-off.

Fields of application:

Large axial spring travel in combination with good radial guidance, suitable for medium loads.
Cone mounts

top

SCHWINGMETALL® Dome Mounts

SCHWINGMETALL® Dome Mounts

solve the problem of height-controlled, attachment-free suspension of machines and units. Thanks to the integrated level control system, these elements can be accurately adjusted to the height of machines and units. The underlay mat allows for attachment-free installation without any anchoring at all for low to medium transverse forces.

Fields of application:

1. Spring elements with a high load-bearing capacity. Almost identical spring values in vertical and transverse direction.
Dome mount

2. Dome mount with protection against tear-off and a square flange with four base attachments.
Series AS dome mounts

3. Dome mount with a rectangular design and two base attachments.
Series C dome mounts

top

SCHWINGMETALL® Flange Elements

SCHWINGMETALL® Flange Elements

represent sturdy and easy-to-realize suspension for medium-weight masses. In combination with the requisite limit stop disks on the upper and lower sides, they ensure protection against tear-off. The limit stop disks are not included in the scope of supply.

Fields of application:

The requisite limit stop disks act as end stops for large compressive and tensile impact loads.
Flange element
Series B flange element

top

SCHWINGMETALL® Inclined Mounts

SCHWINGMETALL® Inclined Mounts

These are designed to be used in conjunction with compression/shear mounts or railstrips for inclined mounts with natural frequencies of up to 3.7 Hz. They offer excellent transverse stability. Available in designs for loads from 100 kg to 4500 kg per mount, they allow for combinations that support masses of any size with variable and easy installation.

Fields of application:

1. Identical suspension characteristics in vertical and transverse direction. Low natural vibration frequencies. Excellent stability of the suspended mass in transverse direction.
Combination element with compression/shear mount

2. Identical suspension characteristics in vertical and transverse direction. Low natural vibration frequencies. Excellent stability of the suspended mass in transverse direction. Significantly higher load-bearing capacity than combination elements with compression/shear mounts.
Combination element with railstrip

3. Identical suspension characteristics in vertical and transverse direction. Low natural vibration frequencies. Excellent stability of the suspended mass in transverse direction.
Inclined railstrips

top

SCHWINGMETALL® Torsion Elements - Ring Elements

SCHWINGMETALL® Torsion Elements - Ring Elements

The four-part outer ring of the ring element is pressed into an undersized bore. In this way, a shaft fitted in the inner bush can be flexibly mounted.

Fields of application:

Predominantly for torsional loads. Also suitable for axial loads.
Ring elements

top

SCHWINGMETALL® Torsion Elements - Torsion Bushes

SCHWINGMETALL® Torsion Elements - Torsion Bushes

The torsion bush enables jolt-free torque transmission. The elasticity of this bush allows for minor misalignments and angle errors at both shaft ends.

Fields of application:

Predominantly for torsional loads. Also suitable for axial loads.
Torsion bushes

top

SCHWINGMETALL® Torsion Elements - Torsion Mounts

SCHWINGMETALL® Torsion Elements - Torsion Mounts

Suitable for flexibly affixing shaft ends on even surfaces. The mount allows for axial, radial, torsional and cardanic movements, each with their own spring stiffness.

Fields of application:

Maintenance-free, elastic hinge bearing. Easy attachment options.
Torsion mounts

top

SCHWINGMETALL® Special Elements – Bell Mounts

SCHWINGMETALL® Special Elements – Bell Mounts

Designed as mounts for hanging masses.

Fields of application:

Parts with tear off safety for absorption of statical tensile forces.
Bell mounts

top

SCHWINGMETALL® Special Elements – Heavy-duty Mounts

SCHWINGMETALL® Special Elements – Heavy-duty Mounts

Highly versatile assembly mounts. They are generally used in such a way that the static load acts in the Z-direction. This provides comfortable vertical synchronization and longitudinal stability (good, for example, if this is the direction of travel on in the case of particularly difficult suspension scenarios on a vehicle), as well as transverse softness. Heavy-duty mounts with protection against tear-off are also available.

Fields of application:

Different spring values in the three spatial directions.
Heavy-duty mounts

top

SCHWINGMETALL® Special Elements – Instrument Mounts

SCHWINGMETALL® Special Elements – Instrument Mounts

This design is suitable for small masses. It offers uniform stiffness in vertical and transverse directions.

Fields of application:

Suited for mounting light masses with low natural frequencies.
Instrument mounts

top

SCHWINGMETALL® Special Elements – Shear Mounts

SCHWINGMETALL® Special Elements – Shear Mounts

This series is ideal for supporting smaller masses with low natural frequencies. In this way, these mounts protect e.g. sensitive instruments, measurement and display devices, or control cabinets against vibrations.

Fields of application:

For mounting small masses with low natural vibration frequencies.
Shear mounts

top